CREATIVE PC-CAM 920 Slim - Manual (Page 22)

21
※ If the icon appears on the LCD Monitor for low battery
power, please change the batteries immediately to
maintain operation normality.
※ The countdown for the Self-timer is 10 seconds.
※ There are 4 types of resolutions offered by the camera:
2048x1536, 1600x1200, 1280x960, and
800x600.
※ Please pay attention to the distance between the
camera and the object when using the Flash Light.
The internal built-in Flash Light of this camera is
effective within 1.5 meter.
※ If the Macro Mode is selected, the flash off function
will be enabled automatically.
※ If the "Memory Full" or “Card Full” warning
messages appear on the LCD Monitor, it means the
memory card is full. Please remove the memory card
and insert a new one in immediately.
6-3 Play Mode
In Play Mode, users can review the recorded still and
movie pictures. To review the pictures, perform the
following:
1. Turn the camera on/off by sliding the lens cover.
2. Press Mode Button
and use Function key
to move to .
3. Press the Button to get into Setup Mode
screen, the LCD monitor will display the menu.
4. Use””and”” of the Function key to go to
“previous” and “next” of the picture display.
5. You can select Delete Picture and Slideshow when
using the Button to enter the function menu.
6. Use “” of the Function key to move between
selections; Use “” to toggle between selections.
7. Use Button to enter the menu.
8. Use exit to end the function menu, and return to Play
Mode menu.
※
DPOF function can only be operated when the
memory card is inserted.
※ If there is no image stored in the internal memory or
memory card, a “No picture” message will pop up on
the LCD Monitor in the Play Mode.
6-4 Movie Mode
You can use Movie Mode to record movie pictures (not
including audio). To record the movie pictures, perform
the following:
1. Turn the camera on/off by sliding the lens cover.
2. Press Mode Button
and use Function key
to move to .
3. Press the Button to get into the Setup Mode