CREATIVE PC-CAM 920 Slim - Manual (Page 23)

22
screen, the LCD monitor will then display the menu.
4. The top left hand corner will display the recorded time
in red while you are recording the movie pictures.
5. The green LED will be on when the Macro key on the
left hand side of the camera is toggled to Macro Mode.
6. You can use Display button to toggle
between display modes while recording movie pictures:
normal display mode and image display mode.
※
When the LCD monitor displays “Memory full", the
recording will be stopped because the memory card is
full.
※ When recording the movie pictures, the maximum
recording time will depend on the free spaces of the
memory card.
※ The digital zoom function will be disenabled when
recording movie pictures.
6-5 PC Mode
● Removable Disk
The digital camera offers removable disk function such as
a card reader device. You can treat this digital camera as
an SD device; just follow the instructions mentioned
below:
1. Please follow the steps of “software installation,
camera driver” to complete the installation of the
camera driver.
2. Turn the camera on/off by sliding the lens cover.
3. Press and hold Mode Button
and use
Function key to move to .
4. You will see “Mass storage” and “PC camera” upon
entering the menu screen when the Button is
pressed.
5. Please use the Function key to move to “Mass
storage” and press Function key to confirm
storage.