The setting sequence, Toshiba – Toshiba LF434 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TOSHIBA
6 F 8 A 0 7 7 0
{4) Hysteresis
TTie hysteresis is the dead band used when multiple ranges are switched. The hysteresis can
be set from 0 to
2 5 %
in increments cf 0 J % . The hysteresis setting is needed only when
automatic selection of multiple ranges is used.
[The setting sequence]
'The following is the setting sequence of span (range),
If multiple range is selected, compulsory range I to range 4 and hysteresis settings are
displayed.
-
60
-
Advertising