Toshiba 32HLX95 - Manual (Page 25)

Using the remote control
Learning about the remote control
The buttons used for operating the TV are described here. For a complete list of the remote controls
functions, see the remote control functional key chart on pages 27-28.
For a list of the buttons that operate the TV Guide On Screen™ system, see page 47
POWER Ö turns the TV on and off Press POWER to turn on the TV. The red LED indicator on the
TV will be illuminated. Press POWER again to turn off the TV.
SLEEP accesses the sleep timer (page 77).
LIGHT The first press of the LIGHT button lights the keypad and turns on the Illumination mode.
With the Illumination mode on, pressing any other key lights the keypad for 5 seconds
(10 seconds if you’re in programming mode). Subsequent presses of the LIGHT button toggle
between turning the Illumination mode on and off
Channel Numbers (0-9, -/100) directly tune channels. The button is used to tune digital channels
(page 64) or to display the favorite channel list (page 42).
INPUT selects the video input source (page 60).
MODE cycles through the six device modes: TV, CBL/SAT, VGR/PVR, DVD, AUDIO 1, and
AUDI02. The TV mode should be chosen to control the TV and Built-in DVD. Every time you
turn the power on, the TV starts from the TV mode. The mode indicator light will remain lit for a
few seconds (page 29).
PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 65).
MENU accesses the main TV menu system (pages 33 and 34) or opens a menu in the TV Guide
On Screen™ system (Chapter 7).
TV GUIDE opens the TV Guide On Screen™ system (Chapter 7).
INFO provides detailed information on highlighted items in the TV Guide On Screen™ system (Chapter 7).
HOME (1%^) accesses the home function of the channel browser feature (page 63)
PIC MODE selects the picture mode (page 69).
ENTER activates highlighted items in the main menu system and the TV Guide On Screen™ system.
Arrow buttons (AT^ ►) When a menu is on-screen, these buttons select or adjust programming
menus. (Also see ^ ^ / @ ^).
@ ◄ / ® ► While watching TV, these buttons tune to the previous/next channel in the
channel history (page 62). (Also see “Arrow buttons” above.)
CH AT cycles through programmed channels when no menu is on-screen (page 40); functions as page
up/down when a menu is on-screen or when the TV Guide On Screen™ system is open
(Chapter 7).
VOL AT adjusts the volume level.
EXIT closes on-screen menus and the TV Guide On Screen™ system.
CH RTN returns to the last viewed channel (page 64).
TV/VCR selects TV mode to view one program while recording another.
RECALL displays TV setting information on-screen (page 79).
MUTE reduces or turns off the sound (page 74).
REC # initiates the recording process when in the TV Guide On Screen™ system.
FAV CH AT tunes to the next higher/lower favorite channel (page 42).
FREEZE accesses the freeze feature (page 68).
You can also control the built-in DVD when the MODE button on the remote control
is in TV mode. For DVD operation the following buttons are used: DVD RTN, PBC,
SLOW, SKIP, REW, FF, PAUSE, PLAY, OPEN/CLOSE, STOP, A-B REPEAT, and
SEARCH (see chapter 10).
Note: The error message “Not
Available” will appear if you press a
key for a function that Is not available
Remote control effective range
For optimum performance, aim the remote
control directly at the TV and make sure
there is no obstruction between the remote
control and the TV.
Point remote
control toward
remote sensor on
front of TV.
' 30'
16.4 ft (5m)
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 25