Setting up the tv guide on screen™ system – Toshiba 32HLX95 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 5: TV Guide On Screen^ setup
Setting up the TV Guide On Screen™ system
(continued)
Screen 12: Do you have an antenna connected?
Select either Yes or No, and then press ENTER. Screen 13
appears.
Note: If you selected No in screen 3, you must select Yes in
this screen to receive a channel lineup and program listings.
Screen 13: Are the settings correct?
If you select Yes, screen 14 appears.
If you select No, screen 1 appears.
Screen 14: Congratulations! You have completed basic
TV Guide On Screen™ system setup.
Note: Read the on-screen information regarding the amount
of time it may take for listing information to download from
the TV Guide On Screen™ service.
Press ENTER to display screen 15.
i You havfi compieted the setup trf yoisr TV Guide On Screen
% system. Up-to-date listings will begin loading over the next
i 24 hours when your TV is powered oft.
!
tt make take more than one day for all eight days of listings ;
to update. During this period feel tree to use your TV, The
guide will automatically receive updates during the period
when your TV is turned ott.
juic^wi
Press Enter to comfnus.
Screen 15: Is a VCR connected?
If you select Yes, screen 16 appears.
If you select No, screen 21 appears.
Screen 16: The on-screen diagram shows the correct way to
connect your VCR to the G-LINK™ terminal on the TV.
Make sure the G-LINK™ cable is installed properly. For
additional details, see page 23.
Press ENTER to display screen 17.
TV Guide On Screen Setup Sheet or the diagram below,
G-LINK
jack JJ
i-LINK cable
I
)
ck of your TV, Then, place one
front of the VCR at a distance of about on
?ofu£ftturto«!(rt(nwe
Screen 17: Select your VCR brand, and then press ENTER.
Screen 18 appears.
Screen 18: Turn on your VCR, insert a tape (either blank or
previously recorded), and then press PLAY. Screen 19
appears.
Screen 19: The TV Guide On Screen™ system will test the code
for the brand of VCR you selected. Do not press any keys
on the TV, remote control, or VCR until the testing process
is completed. When testing is completed, screen 20 appears.
Xow t&sting code 087 (Admtra!)...
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
37