How to select a time mode, Loading and unloading a video cassette, Unloading a cassette – Toshiba KV-5024A User Manual
Page 12: Safety tab, Loading a cassette
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Select a Time Mode
The following table shows the record and playback capability using a T*120 cassette.
Video Record Modes
Mode Display
Record/Playback
Available Time
Recording Interval
(about)
Sound Record
Tape Running
2
2 hour
1/60 second
Possible
Continuous
12
14 hour
0.12 second
Possible
Continuous
24
26 hour
0.22 second
Possible
Continuous
Notes
• 1 2 and 24 hours are in time lapse mode.
• All recordings may be played back in any of the time lapse
speeds.
• Playing back must be performed in the mode that has been
used for recording, otherwise the sound is reproduced
abnormally.
Loading and Unloading a Video Cassette
Loading a Cassette
Ф
Insert a cassette into the cassette compartment with the
window side facing upward. Push until the cassette is
automatically pulled into place. The power is turned on
automatically when the cassette is inserted. (Auto power
function)
NG
Unloading a Cassette
In the power ON mode, press the EJBCT button. The
cassette tape will be ejected automatically and the cassete
indicator " ICTOI " will go out.
Safety Tab
Preventing tape from erasure of recorded programs
If the safety tab is removed from the tape, the R£C button is
disabled when the tape is loaded on the VCR. Since recording
is not operable, pre-recorded programs cannot be erased by
mistake.
Remove the safety tab using a screwdriver or another
implement with a flat edge.
Safety tab
Recording on tape without the safety tab
Cover the hole where the safety tab was with adhesive tape
and recording is operable on the tape. To make sure, cover the
hole with a double layer of adhesive tape.
Adhesive Tape
Notes
Do not insert your hand or a foreign object into the
compartment. This may result in injury or damage. Pay
special care of children to avoid accidents.
When
a
cassette
is
inside
the
compartment,
the
compartment lid does not open.
The cassette indicator remains on whenever a cassette is
inside, even after the power is turned off.
The cassette indicator flashes when a cassette is being
loaded or removed.
11