Toshiba KV-5024A - Manual (Page 13)

Basic Manual Recording
(T) Turn the power ON.
Obtain a picture on the monitor.
Confirm that time/date is displayed correctly.
Set the REPEA T and REC LOCK/RESTART switches as
required for recording.
Insert a cassette.
Select the recording time mode.
@ Press the REC button.
To prevent accidental termination, the REC button cannot be
controlled with a light touch. Press the button firmly and be
sure to confirm that I REC I is lit.
Notes
If the P j 4£/S£ button is pressed during video recording, the
machine will pause. To release it, press the fl4t/S£ button
again or press the REC button. If the pause state continues
for longer than 10 minutes, the machine will stop to pre­
vent excessive wear of the tape.
The functions for auto repeat record, alarm record, etc.
should be set prior to video recording.
Even if a power failure occurs during recording with the REC
LOCK/RESTART switch set to "ON", recording can be
carried out in the same time mode after the power failure
is recovered within about one week.
For repeat video recording, attention must be paid to the
following:
Alarm recording is unavailable during automatic rewind.
No buzzer sound is given even if the tape has reached its
end.
The repeat function is unavailable if the STOP button has
been pressed during automatic rewind. The recording state
must be restored.
Do not forget to check the setting of the time/date generator
before repeat recording or timer recording.
12