Connecting to an analog component, Connecting to a digital component, Connecting a usb mass storage class device – JVC TH-C30 User Manual

Page 14: Connecting the power cord

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connections

Do not connect the power cord until all other connections have been made.

Connecting to an analog
component

You can enjoy the sound of an analog component.

RCA pin plug

cord

(not supplied)

CD

VCR(©CDor@(D)

TV (CD)

Cassette recorder (@)

® To composite video output
(D To Swideo output
(D To audio output

NOTE

The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO lack ofthe VIDEO OUT jacks, not from
the S-VIDEO jack ofthe VIDEO OUT jacks.

Connecting to a digital
component

You can enjoy the sound of a digital component.

*

* DBS = Direct Broadcasting Satellite

NOTE______________

• Only digital audio signals can be input when selecting “DBS” as the

source to play. (See page 15.) When connecting a video component
such as a DBS tuner, operate this system to listen to the sound.

Connecting a USB mass storage
class device

You can connect a USB mass storage class device such as a USB
flash memory device, hard disc drive, multimedia card reader,
digitili camera, etc. to this system.

• After connecting a USB mass storage class device to this system

and selecting “USB MEMORY” as the source, the control screen
appears on the TV screen. (See page 26.)

USB cable (not supplied)

Center unit (on the

front panel

NOTE

When connecting a USB mass storage class device, refer also to its
manual.
Connect one USB mass storage class device to the system at a time. Do
not use a USB huh.
You cannot charge the USB mass storage class tlevice while
connecting it to the USB MEMORY jack.
While playing back a file in a USB mass storage class device, do not
disconnect the device. It may cause a malfunction of both the system
and the device.
JVC bears no responsibility for any loss of data in the USB mass
storage class device while using this system.
When connecting with a USB cable, use a cable less than 1 m in
length.
This system is compatible with the USB 2.0 Full-Speed (not
compatible with the USB 1.1).
You can playback the following types ot files in a USB mass storage
class tlevice (maximum data transfer rate: 2Mbps):
- Music: MP3. WMA
- Picture: JPEG
- Movie: MPEG-4 (ASF), DivX (maximum frame rate of 30 fps for

progressive)

You cannot playback a file larger than 2GB.
When playing a tile which has a large transfer rate, frames or sounds
may be dropped during playback.
This system cannot recognize a USB mass storage class device whose
rating exceeds 5V/500 mA.
This system may not recognize some USB mass storage class devices.
This system may not playback some files even though their formats
are listed above.

Connecting the power cord

Make sure that all other connections have been completed.

Center unit y....... ...'p

Powered
subwoofer

Power cord

(Supplied)

Power cord

Plug Into AC outlets.

CAUTION

Disconnect the power cord before cleaning or moving the system.
Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.

n

Advertising