JVC TH-C30 - Manual (Page 33)

Advanced operations See page 22 for button locations.
4
Press ENTER.
Example:
GAMMA t)
5
Press Cursor T / A to change the
setting.
6 Press ENTER.
The current VFP settings appear again.
7 Repeat steps 3 to 6 to adjust other
parameters.
8 Press VFP.
NOTE
Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
Program Playback
■ While stopped
7 Press PLAY MODE
repeatedly until program
window appears on the TV screen.
PRG indicator lights on the display window.
a''
¡Siiiggg
iiii; '
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO OELETE THE PROGRAM.
2
Follow the instructions that appear on
the TV screen to program the desired
chapters/tracks.
. For details on using the number buttons, see “How to use the
number buttons”. (See page 20.)
. The content’s numbers that you have to specify for
progr«mrming varies depending on the disc/file type:
- DVD VIDEO: Titles and chapters
-VCD. SVCD, CD: Tracks
-DVD AUDIO, MP3, WMA: Groups and tracks
. Before you program tlie tracks in bonus group on a DV.D
AUDIO, perform the procedure of “Playing back a bonus
group” (see page 21) to turn off the BONUS indicator on the
display window,
. You can specify the chapters/tracks whose number is up to
99. '
. There may be a case tliat the group or title number can be
entered even for discs that contain no groups or titles. In such
a case, press
ENTER to proceed to the Track/Chapter column.
. When you press ENTER instead of tlie number buttons in the
Track/Chapter column, “ALL” appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
To clear the programs one by one from the last entered
number
Press CANCEL repeatedly.
To clear all programs
Press and hold CANCEL.
You can also clear the program by turning off the system.
3 Press ^ (play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press ■. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and disappear from the TV screen.
NOTE
When the source is USB MEMORY, Program Playback does not
work.
There maybe a case where bonus group on a DVD AUDIO cannot he
played.
The Resume function cannot be used with Program Playback.
Program Playback may not work tor some discs.
30