JVC TH-C30 - Manual (Page 19)

Basic operations See page 14 for button locations.
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, the shut-off time changes.
Example:
minutes
S L E E P 6 0
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until “SLEEP —” appears.
• Turning off the power also cancels the Sleep Timer.
Adjusting the output level of
the subwoofer and speakers
1
Press SPK LEVEL to show the target
speaker indication on the display
window.
Each time you press the button, the indication of the speakers
changes as follows:
FRNT L (Front Left speaker) ^ FRNT R (Front Right
speaker) ^ CENTER (Center speaker) ^ SURR L
(Surround Left speaker) ^ SURR R (Surround Right
speaker) ^ SUBWFR (Subwoofer) ^ (back to the
beginning)
Press LEVEL +/- to adjust the output
level from -6 to +6.
NOTE
You can also make adjustments by using the setup menu shown on
the TV screen. (See page 34.)
The adjustments take effect for all sources.
Changing the scan mode
The system can be accommodated to your TVs scan mode.
NOTE______________
• To use the system in the progressive mode, it is required that the
center unit is connected to the TV by using a component video cord
(not supplied). (See page 10.)
■ While DVD or USB MEMORY is selected as the source and
stopped
7
Press and hold SCAN MODE for
2 seconds.
Currently selected scm mode appears on the display window,
2
Press Cursor ► / ◄ to select the desired
mode.
Each time you press the button, the scan mode changes as
follows:
• 480i*: Select this to change the scan mode to interlace mode.
. 480p*: Select this to change the scan mode to progressive
mode.
* 480i and 480p indicate the number of scanning lines and
scanning format of a video signal.
-4801 indicates 480 scanning lines with interlaced format.
-480p indicates 480 scanning lines with progressive format.
. You can get better picture quality in the progressive mode
than in the interlace mode.
3
Press ENTER while the selected mode is
displayed.
When the progressive mode is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
Although the picture mc\y be distorted when you press ENTER, this is
not a malfunction of the system.
There are some progressive TVs and High-Definition TV^s that are
not fully compcitible with this system, resulting in an unncitural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to the interlace mode.
To check the compatibility of your TV, contact your local JVC
customer service center.
All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
Adjusting the sound
7
Press TREBLE/BASS to show "TRE" or
"BASS" on the display window.
Each time you press the button, the indication alternates
between “TRE” and “BASS”.
• TRE: Select this to adjust treble sound,
. BASS: Select this to adjust bass sound.
2
Press LEVEL +/- to adjust the level from
- 10 to +10 (in 2 steps).
NOTE
The adjustments take effect for all sources.
16