Chrysler 2008 Sebring Convertible - Manual (Page 332)

Towing Tips — Automatic Transaxle
The “D” range can be selected when towing. However, if
frequent shifting occurs while in this range, the “3” range
should be selected.
NOTE: Using the “3” range while operating the vehicle
under heavy operating conditions will improve perfor-
mance and extend transaxle life by reducing excessive
shifting and heat build up. This action will also provide
better engine braking.
If you REGULARLY tow a trailer for more than 45
minutes of continuous operation, then change the auto-
matic transaxle fluid and filter according to the interval
specified for “police, taxi, fleet, or frequent trailer tow-
ing” in the “Maintenance Schedule” in this manual.
NOTE: Check the automatic transaxle fluid level before
towing.
Towing Tips — Electronic Speed Control (If
Equipped)
− Don’t use in hilly terrain or with heavy loads.
− When using the speed control, if you experience speed
drops greater than 10 mph (16 km/h), disengage until
you can get back to cruising speed.
− Use speed control in flat terrain and with light loads to
maximize fuel efficiency.
Towing Tips — Cooling System
To reduce potential for engine and transaxle overheating,
take the following actions:
− City Driving
When stopped for short periods, put the transaxle in
neutral and increase engine idle speed.
− Highway Driving
Reduce speed.
332 STARTING AND OPERATING