Chrysler 2008 Sebring Convertible - Manual (Page 405)

2. Remove the two plastic wing nuts from the taillight
housing.
3. Grasp the taillight housing with one hand on the
bottom of the housing and the other hand on the inboard
housing flange and pull it outward firmly to disengage
the housing from the vehicle.
4. Rotate the applicable bulb’s electrical connector 1 ⁄
4
turn counterclockwise and remove it from the taillight
housing.
Location Plastic Wing Nuts
1 — Tail/Stop Light
2 — Turn Signal Light
MAINTAINING YOUR VEHICLE 405
7