Chrysler 2008 Sebring Convertible - Manual (Page 406)

5. Remove the bulb from the connector socket and install
the replacement bulb.
6. Install the bulb and connector assembly into the
taillight housing and rotate the connector
1 ⁄
4
turn clock-
wise to lock it in place.
7. Reinstall the taillight housing.
Changing the Backup Light
1. Open the trunk.
2. Rotate the bulb’s electrical connector 1 ⁄
4
turn counter-
clockwise and remove it from the housing.
3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
housing and rotate the connector
1 ⁄
4
turn clockwise to
lock it in place.
Backup and Rear Fog Light
406 MAINTAINING YOUR VEHICLE