Cal Spas Genesis Portable Spa - Manual (Page 23)

2009 Genesis Portable Spa
LTR20091058, Rev. A
Cleaning and Maintenance
www.calspas.com
21
Cleaning the Shell
All-Purpose Cleaner (Spa Finish Cleaning)
Cal Spas All-Purpose Cleaner is an essential part of maintaining your spa’s finish. Through
normal use, the spa’s finish can accumulate dirt, oil, and calcium causing a rough feel and
unsightly scum lines. Cal Spas All-Purpose Cleaner is a low detergent, non-abrasive cleaner
specifically formulated to clean the spa without damaging its acrylic finish.
The most effective solution to minimize cleaning time is prevention. When the following steps
are followed, the spa’s finish will actually start to resist most of the elements that cause
calcium build-up and make scum line clean up easier.
Prior to Spa Start-Up and Refilling
Spray Cal Spas Multi-Purpose Cleaner directly on 1.
to the spa’s finish.
Wipe clean with a clean soft cloth.
2.
Repeat on heavily calcified areas. 3.
Wipe spa thoroughly with a wet sponge, rinsing 4.
often with a bucket of clean water.
Allow spa to dry completely.
5.
Apply a coat of Cal Spas Fast Sheen to the spa’s 6.
entire finish with a soft towel or sponge.
Allow Fast Sheen to dry until white and
7.
powdery.
Buff clean with a soft cloth, rotating frequently.
8.
Periodic Maintenance
Spray Cal Spas Multi-Purpose Cleaner directly to 1.
the spa’s finish.
Wipe clean with a clean soft cloth.
2.
Wipe spa thoroughly with a wet sponge, rinsing 3.
often in a bucket of clean water.
Cal Spas Multi-Purpose Cleaner should not be sprayed
directly into the spa water. Incorrect usage of this
product will cause water clarity issues.
Fast Sheen (Spa Finish Protecting Wax)
Cal Spas Fast Sheen is an essential part of maintaining your spa’s finish. Through normal use,
the spa’s finish can accumulate dirt, oil, and calcium, causing a rough feel and unsightly scum
lines. Cal Spas Fast Sheen is a non-oil based wax that is specifically formulated to protect the
spa’s finish from the chemicals and minerals associated with normal spa use.
The most effective solution to minimize cleaning time is prevention. When the following steps
are followed, the spa’s finish will actually start to resist most of the elements that cause
calcium build-up and make scum line clean-up easier.
Prior to Spa Start-Up and Refilling
Spray Cal Spas Multi-Purpose Cleaner directly to 1.
the spa’s finish.
Wipe clean with a soft cloth.
2.
Repeat on heavily calcified areas. 3.
Wipe spa thoroughly with a wet sponge, rinsing 4.
often in a bucket of clean water.
Allow the spa to dry completely.
5.
Apply a coat of Cal Spas Fast Sheen to the spa’s 6.
entire finish with a soft cloth or sponge.
Allow Fast Sheen to dry until white and
7.
powdery.
Buff clean with a soft cloth, rotating frequently.
8.
IMPORTANT: Cal Spas Fast Sheen should not be used
on spas full of water. Only apply to clean, cool, dry
surfaces. Incorrect product usage may cause water
clarity issues.