Canon A95 - Manual (Page 106)

104
Various Functions
z When the print type
(p. 105) is set to [Index],
select an image using
the left or right button
and mark or remove
marks from images using
the up or down button. A
check mark appears on
the marked image.
z You can press the zoom lever toward and
use the same procedures to select images in
index playback (three images).
All the Images on a CF Card
z Press the zoom lever
toward to switch to
index playback (three
images).
z You can set one copy of
each image to print by
pressing the SET button,
then selecting [Mark all]
using the up or down
button, and pressing the
SET button again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print settings
can be deleted. For the instructions on
changing settings, please reread Step 3 from
the beginning.
z You can cancel all the settings by selecting
[Clear all].
4
Press the MENU button.
z The setting will be complete and the Print
Order menu will reappear.
z Images are printed in order from oldest
to newest by the shooting date.
z A maximum of 998 images can be set.
z When [Print Type] is set to [Both], the
number of copies can be set. When it is
set to [Index], the number of copies
cannot be set (only one copy will be
printed).
z Print settings can also be assigned to
images with the bundled software
programs (ZoomBrowser EX or
ImageBrowser) on a computer.
However, do not set the date in the
DPOF print settings when printing
images that have had the date
embedded with the [Date Stamp]
function. This may cause the date to be
printed twice.