Canon A95 - Manual (Page 88)

86
Shooting – Advanced Functions
Adjusting the Tone (White Balance)
When the white balance is set to match the
light source, the camera reproduces colors
more accurately.
Combinations of setting contents and light source
are as follows.
Mode Dial
Auto
Settings are automatically set by
the camera
Daylight
For recording outdoors on a
bright day
Cloudy
For recording under overcast,
shady or twilight skies
Tungsten
For recording under tungsten
and bulb-type 3-wavelength
fluorescent lighting
Fluorescent
For recording under warm-white,
color-white or warm-white (3-
wavelength) fluorescent lighting
Fluorescent H
For recording under daylight
fluorescent, or daylight
fluorescent-type 3-wavelength
fluorescent lighting
1
Select * (Auto) in
the FUNC. menu.
z See Selecting Menus
and Settings (p. 66).
* The current setting is
displayed.
2
Select the white balance you wish
to set using the left or right
button.
z See Setting a Custom White Balance (p. 87).
z When the LCD monitor is on, you can check
the setting on the display.
z A shot can be taken immediately by pressing
the shutter button. The menu will reappear
after the shot, allowing you to adjust the
setting easily.
3
Press the FUNC. button.
Custom
For setting a custom value with a
white sheet of paper, etc., to
obtain the optimal white balance
for the conditions.