Canon A95 - Manual (Page 133)

131
Troubleshooting
T
roubleshoot
ing
Image not showing
on TV. Incorrect video system setting. z Set the video system to the appropriate
setting, NTSC or PAL, for your TV (p. 118).
Shooting mode set to (Stitch
Assist).
z The output will not appear on a TV monitor in
(Stitch Assist) mode. Shoot in a different
mode.
Zoom does not
operate. Zoom lever was pressed while
shooting in Movie mode. z Operate the zoom before shooting in Movie
mode.
Reading images
from CF card is
slow. Currently used CF card was
formatted in another device. z Use a CF card formatted in your camera. See
Formatting a CF Card (p. 19).
Recording images
to CF card takes a
long time.
Problem Cause Solution