Comtrol Modbus TCP Quick Start - Manual (Page 37)

DeviceMaster UP Modbus/TCP Quick Start: 2000477 Rev. G Configuring Read/Write Raw/ASCII Devices - 37
Configuring Read/Write Raw/ASCII Devices
Embedded Web Page Configuration
Use the following procedure to configure read/write raw/ASCII serial devices.
1. Access the Server Configuration web page by entering the DeviceMaster UP IP address in your web
browser or by highlighting the DeviceMaster UP in PortVision DX and clicking Webpage.
Note: If the browser does not display the web page correctly, clear the browser history and refresh the
DeviceMaster UP web page.
2. Click the Serial Device Configuration option to open the Serial Device Configuration page.
3. Click Port N for the port that you want to configure, where N is the port number.
4. If desired, provide a Serial Interface Name.