Comtrol Modbus TCP Quick Start - Manual (Page 62)

62 - Filtering/Data Extraction Configuration DeviceMaster UP EtherNet/IP Quick Start: 2000478 Rev. D
Filtering/Data Extraction Configuration
4. Scroll down to the Filtering/Data Extraction Configuration options and select your filtering modes:
• Use String Filtering if:
- Your received data can be no greater than 128 bytes in length.
- Your received data is not in EPCglobal or Barcode UPC/EAN formats or you do not want the
DeviceMaster UP to extract the RFID tag or Barcode parameters.
- You want to filter and eliminate duplicate received messages.
• Use RFID Filtering if:
- You have an Alien or Intermec RFID reader or another reader that can provide RFID tag data is
ASCII Hexadecimal format similar to either an Alien or Intermec reader.
- Your data is in EPCglobal format and you want the DeviceMaster UP to extract the RFID tag data
parameters and filter based on those parameters.
• Use Barcode Filtering if your barcode data is in UPC-A, UPC-E, EAN-13, JAN, EAN-14, or EAN-8
formats and you want the DeviceMaster UP to extract the barcode data parameters and filter based on
those parameters.
5. Make sure that Reset Port and Save in Flash are selected and then click Submit when you have
completed configuration.