Casablanca Fan Company Casablanca Ceiling Fan 6643050 - Manual (Page 5)

5
Step 5. To hang the fan body in the
canopy, hold the fan body fi rmly and
insert the ball into the canopy open-
ing. Check that no wires were pinched.
Rotate the fan body until the slot in the
nylon ball fi ts into the pin opposite the
canopy opening.
NOTE: Independent control of the
light fi xture using a W-81 requires
an additional power wire run from
the wall switch to the fan. See Page
8 for wiring.
CAPPED
BLUE
D1-OPTION
WIRE ON
4-SPEED ONLY
FOR INDEPENDENT
W-81 LIGHT
CONTROL
PIN SLOT
BALL
CANOPY
HATCH
CANOPY LOCK WASHER (5)
CANOPY SCREW (5)
Step 4. Attach the canopy to the crossbar mounting bracket with three of
the 8-32 x 2
1 / 2
” long canopy screws and lock washers provided with your
Casablanca fan. Hand tighten until snug against the ceiling.
CANOPY
SCREW
CANOPY
LOCK
WASHER
FEED OUTLET BOX
WIRES THROUGH
CANOPY OPENING
Note: On sloped ceilings, align the
canopy opening toward the top or
peak of the room.
CANOPY HARDWARE
HANGING THE FAN
CANOPY INSTALLATION
CANOPY
P
ANAMA
™