Cortelco network adaptor - Manual (Page 18)

Level Switch Settings Table (Cont.)
Telephone Telephone Switch Notes
Manufacturer Set Model Setting
TIE
EX-2260 2 ---
Meritore 2 ---
Onyx 3 ---
TC-22 2 ---
Ultracom CX 2 2
Keyset 8 2 2
Toshiba DKT-1000 series 1 or 3 1a
DKT-2000 series 3 1a
EKT 2000 series 2 2
EKT-3000 series 2 1a
EKT-6000 series 3 or 4 ---
Perception 3 7
Strata (Key Syst) 2 1a & 2
Strata (Digital) 1 or 3 1a & 2
103 series 2 or 3 ---
Trillium Panther 2 or 3 1a & 2
Talkto 616 2 1a & 2
Vodavi Electronic Key Sys --- 1b
Starplus Digital --- 7
Walker Marathon 1 or 4 ---
Poet 1 1a
NOTES:
1. Custom Factory Settings:
a. The KONEXX product may require a custom factory setting for this phone
set. If difficulties are encountered, contact Technical Support at 1 800
275-6354.
b. The KONEXX product requires a custom factory setting to work on these
phones. Contact KONEXX Technical Support at 1 800 275-6354
2. Insufficient data is available to determine whether the phone system will
support autodialing.
3. The KONEXX product will not support autodial on Model 7300 series
telephones.
4. You may have to dial an outside line access number, such as a 9, on the
phone before autodialing.
5. Handset Wiring Compatibility:
a. Phone has nonstandard handset wiring and is not compatible with the
KONEXX product.
b. Phone has nonstandard handset wiring. The KONEXX product requires
the use of a special adapter cable set. Contact Technical Support at
1 800 275-6354.
6. When autodialing the user must dial a number on the keypad of the phone
after the modem has dialed to maintain the line.
7. These phone systems do not support autodialing.
8. Modem connections limited to 2400 bps by this phone.
9. Teledex telephone is an analog handset and the laptop user may connect
directly into the wall jack if the Teledex telephone set does not have a data
port.