Cortelco network adaptor - Manual (Page 8)

Step 9. In the Extra Settings box type x3
Step 10. Click OK to exit Advanced Connection Settings screen
Step 11. Click OK to exit Modem Properties screen
Step 12. Click Close to exit Modems Properties screen
Step 13. Close Control Panel
Step 14. Reboot your computer and proceed to Establishing Your
Connection (Rebooting your computer is only necessary after
first installing x3).
To enter the “x3” in Windows 2000:
Step 1. Select START button
Step 2. Select SETTINGS
Step 3. Select CONTROL PANEL
Continue to next page