Cortelco network adaptor - Manual (Page 4)

Data Port Anywhere Installation
Step 1. Connect the USB cable on the DPA to your computer USB
port. The first time you connect the DPA to your computer, you will be
prompted to install USB drivers, simply follow the prompts. The DPA
uses standard Microsoft drivers. Follow the prompts to identify the
DPA to your operating system.
Step 2. Remove the coiled handset cord from the telephone handset
(2A) and insert it into the DPA jack labeled PHONE (2B).
2A
Step 3. Connect your PC Card or internal modem cable to the DPA
jack labeled MODEM.
The DPA is now installed and ready for use. If you choose to use the
telephone handset for voice communications when your modem is not
in use see next page.
2B