Cabletron Systems TRXI-24 - Manual (Page 47)

INSTALLATION
Page 3-18
c. Verify that the fiber connection meets the dB loss specifications
outlined in Fiber Optic Network Requirements.
d. Check that the port is enabled through TRXI Local
Management.
If a link still has not been established, contact Cabletron Systems
Technical Support.
3.9 FINISHING THE INSTALLATION
The TRXI is now ready for operation. Before placing the network into
service, test the installation thoroughly, making sure that all stations
are able to be addressed and that the TRXI and all stations are
indicating normal operation. Ensure that the networking software is
configured properly to match the installed network. If you encounter
errors or abnormal operation, proceed to Chapter 4, Testing and
Troubleshooting.