Cabletron Systems TRXI-24 - Manual (Page 51)

TESTING AND TROUBLESHOOTING
Page 4-4
4.3.1 Static System Messages
These messages display TRXI configuration information. To view the
Static System Messages, momentarily press the Display button
located below the LCD window. Press the Display button to scroll
through each message. If you do not press the Display button within
ten seconds, the display defaults back to the product name.
Displayed Message Comments
IP Address Displays the current IP
xxx.xxx.xxx.xxx address. This may be changed
through Local Management.
MAC Address Displays the Hardware
0000B8xxxxxx or MAC address.
RAM Image Displays the revision number of the
Rev. xx.xx.xx Flash EEPROM.
Boot PROM Displays the revision number of the
Rev. xx.xx.xx internal Boot PROM.
Flash Programmed Displays the number of times the
xx Times the Flash EEPROM has been
programmed
COM 1 Displays the current baud rate
Baud Rate xxxxxx of the COM 1 port.
COM 1 Displays the current function
Function xxxxxx (Console, Modem, UPS, or SLIP) of
the COM 1 port.
COM 2 Displays the current
Baud Rate xxxxxx baud rate of the COM 2 port.
COM 2 Display the current function
Function xxxxxx (-N/A-, Console, Modem, UPS, or
SLIP) of the COM 2 port.