Cabletron Systems TRXI-24 - Manual (Page 53)

TESTING AND TROUBLESHOOTING
Page 4-6
4.3.3 Unsaved Initialization Messages
These are power-up messages that appear on the LCD as the event
occurs but are not saved in a buffer for future recall. If a Failure or
Error Message appears, call Cabletron Technical Support.
Failure or Error Messages
Cabletron
Cabletron
Ctrl. Reg. Err. BBRAM Failure
Cabletron Cabletron
SDRAM Failure Modem SCC Error
Cabletron Cabletron
Bit Swap Failure Console SCC Error
Cabletron Cabletron
LDRAM Failure 82C54 Failure
Cabletron
Eagle Failure
Normal Unsaved Initialization Messages
Cabletron
Cabletron Cabletron
Hardware Init Boot From Flash Eagle Test
Cabletron Cabletron Cabletron
BOOTP Discovery RARP Req. State Bit Swap Test
Cabletron Cabletron
TFTP Req. State TFTP in Progress
Cabletron Cabletron
TFTP Complete Erasing Flash
Cabletron Cabletron
Writing Flash Flash Programmed
Cabletron Cabletron
Test in Progress Programming LRAM
Cabletron Cabletron
Boot Complete TRXI-xx Cabletron