Local management – Cabletron Systems TRXI-24 User Manual
Page 55
LOCAL MANAGEMENT
Page 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
the TRXI’s Local Management. It also explains the Local Management
screens and instructions for using them.
Local Management provides the tools to manage the TRXI and all of
its attached segments. You can change factory defaults, enable/disable
ports, and use the advanced features of Local Management to:
•
control access to your token ring network using the Ring
Security feature
•
assign an IP address and subnet mask
•
set interface parameters for both serial ports, Local
Management (Console), Serial Line Internet Protocol (SLIP),
Uninterruptible Power Supply proxy (UPS), or Modem
•
control password access to the TRXI through the community
names established in the Community Names Table
•
designate which Network Management Workstations receive
trap alarms from the device
•
navigate through the Management Information Base (MIB)
and manage the objects within it from a remote location. Given
the appropriate security level, the MIB is accessible from the
TRXI through the SNMP Tools screen.