Cabletron Systems TRXI-24 - Manual (Page 56)

LOCAL MANAGEMENT
Page 5-2
5.1 MANAGEMENT TERMINAL REQUIREMENTS
To access TRXI Local Management, you need either:
• a Digital Equipment Corporation VT series terminal
• a VT type terminal running emulation programs for the Digital
Equipment Corporation VT series
• an IBM or compatible PC running a VT series emulation
software package.
5.1.1 Attaching the Management Terminal
Cabletron supplies an RJ45 Cable Kit with the TRXI. This kit includes
a UTP console cable with RJ45 connectors on each end. It also
provides adapters for DB9 or DB25 connections. Refer to the RJ45
Cable Kit Instruction Sheet for adapter pinouts and additional
instructions.
To attach the management terminal to the TRXI’s COM 1 port:
1. Attach the male RJ45 connector to the COM 1 port of the TRXI as
shown in Figure 5-1.
2. Attach the female end (25-pin or 9-pin, as applicable) to the COM
port on the terminal.
Figure 5-1. Management Terminal Connection
MANAGEMENT TERMINAL CONSOLE CABLE
COM 1 RJ45 PORT
COM PORT
TRXI-24 TOKEN RING HUB WITH LANVIEW®