Cabletron Systems TRXI-24 - Manual (Page 57)

LOCAL MANAGEMENT
Page 5-3
5.1.2 Setting the Management Terminal Setup Parameters
Table 5-1 lists the setup parameters for the local management
terminal. If you have a Digital Equipment Corporation VT terminal,
press F3 to access the Setup Directory. If you have a PC emulation of
the Digital Equipment VT terminal, refer to your equipment user
manual for setup parameters.
Table 5-1. VT Terminal Setup Parameters
MENU FUNCTION SELECTION
Display Setup: Columns 80 Columns
Controls Interpret Controls
Auto Wrap No Auto Wrap
Test Cursor Cursor
General Setup: Mode 7 Bit Control
Cursor Keys Normal Cursor Keys
Communications
Setup: Transmit Transmit = 9600
Receive Receive = Transmit
XOFF any option
Bits, Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
Local Echo No Local Echo
Port DEC-423, Data
Leads Only
Transmit any option
Auto Answerback No Auto Answerback
Keyboard Setup: Auto Repeat any option
Keyclick any option
Margin Bell Margin Bell
Warning Bell Warning Bell
Auto Answerback No Auto Answerback