Cabletron Systems TRXI-24 - Manual (Page 67)

LOCAL MANAGEMENT
Page 5-13
5.3.2 The SNMP Community Names Screen
The SNMP Community Names screen lets you set community names.
Community names serve two purposes; they act as passwords to Local
Management and they are agents of security control to your TRXI. You
control TRXI access by establishing up to three levels of security
authorization (Read Only, Read-Write, and Super-User). Only a user
with Super-User access can change the device IP address and the
community names.
Caution: Community Names are passwords to Local Management.
Remember your Community Name.
Local Management passwords accorded Read-Only and Read-Write
access privileges are not allowed editing capabilities to some fields. In
this case, the message “AUTHORIZATION PROHIBITS ACCESS”
appears. Figure 5-6 shows the SNMP Community Names screen.
Figure 5-6. SNMP Community Names Screen
TRXI LOCAL MANAGEMENT Flash Image Version: X.XX.XX
SNMP COMMUNITY NAMES
Component Name Community Name Access Policy
SAVE RETURN
TRXI Chassis MGR
TRXI Chassis MGR
TRXI Chassis MGR
public
ring1
<CR>
READ-ONLY
READ-WRITE
SUPER-USER