Cymatic Audio LP-16 Manual - Manual (Page 14)

PRODUCT MANUAL PRODUCT MANUAL 27 26 USB INTERFACE MODE USB INTERFACE MODE
16.2.1. Mixer View
The mixer screen of the control panel is where most of the interaction with the LP-16 occurs,
when it is serving as a computer audio interface. It offers the following controls:
Input 1&2 Level Faders
These on-screen faders control the input levels of analog signals that feed the LP-16’s 1/8” stereo
input. Adjust the level of the faders to configure an optimum level on the corresponding input
meter.
Link Button
Press this button to link both input channels. Input level adjustments made to either fader will
affect the input level of both channels.
Linking both channels is useful when you are feeding the 1/8” analog input a single stereo channel
and you wish to adjust its overall input level.
Input 1&2 Level Meters
The input level meters display the signal level of the audio feeding the LP-16’s 1/8” analog input.
Mute
Press the mute button of either input channel to mute the incoming audio for that channel.
Settings Display
The orange text in this display indicates various settings that are configured in other tabs of the
control panel, including:
• Sample Rate
• Synchronization Source
• Synchronization Status
Line Output Meters
These 16 separate level meters display the signal level of any audio that is being streamed from
the 16 outputs of the computer’s DAW software, and are being routed to the LP-16’s 16 separate
line level outputs.
If you see any of the 16 channels showing an overload (red light) on its corresponding level meter,
be sure to reduce the level of the signal source, from the DAW software itself.
Settings Button
Click the settings button to navigate to the different settings tabs of the control panel, where you
can make further adjustments.
USB Icon
The USB icon illuminates in a green color when the LP-6 has made a valid connection to the
Windows computer, and the LP-16 can serve as a computer audio interface for that machine.
Bus Level
These on-screen faders control the input levels coming from the connected PC
Line Level
These on-screen faders control the input levels of the analog signals that feed the LP-16’s 1/8”
stereo input.
Bus Mute
Mutes the input signal coming from the connected PC
Line Mute
Mutes the input signal coming from the LP-16’s 1/8” stereo input.