Cymatic Audio LP-16 Manual - Manual (Page 3)

PRODUCT MANUAL PRODUCT MANUAL 5 4 SAFETY PRECAUTIONS USAGE PRECAUTIONS
1. SAFETY PRECAUTIONS
1.1. AC adapter
• Be sure to use only the supplied 12 V DC, 1000 mA AC adapter, which is equipped with a
“center-positive” plug. The use of an adapter other than the specified type may damage the
unit and could pose a safety hazard.
• Connect the AC adapter only to an AC outlet that supplies the rated voltage required by the
adapter.
• When disconnecting the AC adapter from the AC outlet, always grasp the adapter itself and
do not pull at the cable.
• During lightning or when not using the unit for an extended period, disconnect the AC
adapter from the AC outlet.
1.2. Environment
To prevent the risk of fire, electric shock or malfunction, avoid using your Live Player LP-16 in
environments where it will be exposed to:
• Extreme temperatures
• Heat sources
• Excessive humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
1.3. Handling
• Never place objects filled with liquids on the LP-16, as this can cause electric shock.
• Do not place an open flame source, such as a lighted candle, on the LP-16 since this can
cause fire.
• The LP-16 is a precision instrument. Do not exert undue pressure on the keys and other
controls. Also take care not to drop the unit, and do not subject it to shock or excessive
pressure.
• Take care that no foreign objects (coins, pins etc.) or liquids can enter the unit.
1.4. Connecting cables and input and output jacks
Always turn off the power to the LP-16 and all other equipment before connecting or disconnecting
the power source. Make sure to disconnect all connection cables and the power cord before
moving the LP-16.
1.5. Alterations
Do not open the case of the LP-16, or attempt to modify the product in any way. Doing so will void
the warranty. There are no serviceable parts inside the unit.
1.6. Volume
Do not use the headphone output of the LP-16 at a loud volume for a long time since this can
cause hearing impairment.
2. USAGE PRECAUTIONS
2.1. Electrical interference
For safety considerations, the LP-16 has been designed to provide maximum protection against
the emission of electromagnetic radiation from inside the device, and protection from external
interference. However, equipment that is very susceptible to interference or that emits powerful
electromagnetic waves should not be placed near the LP-16, as the possibility of interference
cannot be ruled out entirely. With any type of digital control device, the LP-16 included,
electromagnetic interference can cause malfunctioning and can corrupt or destroy data. Care
should be taken to minimize the risk of damage.
2.2. Cleaning
Use a soft, dry cloth to clean the LP-16. If necessary, slightly moisten the cloth. Do not use
abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may
dull the finish or damage the surface.
3. LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information on Cymatic Audio’s
Limited Warranty, please see complete details online at www.cymaticaudio.com/warranty
CERTIFICATIONS
This product complies with the European Union Council Directives and
Standards relating to Directive 2004/108/EC for Electromagnetic compatibility
(EMC) and Low Voltage Directive 2006/95/EC
This product is compliant with the EU Directive 2011/65/EU for the Restriction
of the use of Certain Hazardous Substances in Electrical and Electronic
Equipment. No lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium
(Cr+6), PBB or PBDE is intentionally added to this device. Any traces of
impurities of these substances contained in the parts are below the RoHS
specified threshold levels.
This equipment has been tested and found to comply with the requirements
of 47 CFR of PART 15 limit for radiation and conduction emission relating to
FCC rules Part 15B: 2010.