Troubleshooting, Standalone player mode, Usb audio interface mode – Cymatic Audio LP-16 Manual User Manual

Page 18: Specifications, Legal disclaimer, Troubleshooting 4, Standalone player mode 4, Usb audio interface mode 4, Specifications 5, Legal disclaimer 5

Advertising
background image

PRODUCT MANUAL

PRODUCT MANUAL

35

34

TROUBLESHOOTING

SPECIFICATIONS

18.

TROUBLESHOOTING

Always make sure that you have downloaded and installed the latest drivers and firmware for your

Live Player LP-16. The latest firmware and driver downloads for the LP-16 are available at

www.

cymaticaudio.com/downloads

18.1. Standalone Player Mode

Problem

Possible Solutions

I do not understand how to create a playlist

to use with my LP-16

Playlists for the LP-16 are created using the external,

Windows compatible LP-16 playlist software. Download

the playlist software and refer to its documentation on

how to create a playlist, then export it to a USB drive

that you connect to your LP-16

My connected USB device is recognized by

the LP-16 and does not pass the device test

when connected.

The connected USB device must be formatted FAT-32.

Format it as FAT-32 on your computer or allow the LP-

16 to format the device

I am playing back a group of stereo files on

the LP-16 and the playback behavior is not

working as expected

From the stereo player menu, select “Playback Mode”

and make sure you have configured the specific

playback mode that corresponds to the playback

behavior you desire

I have manually copied some audio files to

the USB drive I have attached to the LP-16,

but I cannot figure out how to make a playlist

of the files for use with my LP-16

The LP-16’s external playlist software is required to

configure a playlist and copy it to an attached USB

drive. See the user’s manual for the external playlist

software for more details

18.2. USB Audio Interface Mode

Problem

Possible Solutions

On my Windows PC, the LP-16 is not

recognized by the PC, even though I the

device drivers have been installed and the

device is plugged in using the supplied USB

cable.

Make sure that there is no USB storage device

connected to the front panel USB storage connector of

the LP-16. Doing so will automatically put the LP-16 into

“recorder mode” and it will not be usable as a computer

audio interface at the same time.

When I connect channels 1-2 of the rear-

panel line output to my powered speakers,

the signal is too loud and I have no way to

adjust the listening volume.

The line outputs of the LP-16 do not have a volume

control of their own. To use it with a set of powered

speakers, you can:

1-Connect the outputs to a pair of powered speakers

that have their own onboard volume control

2-Connect the output of the LP-16 to the line inputs of a

small desktop audio mixer or standalone volume control

unit and then connect the outputs of those to your

powered monitors.

I cannot find the Macintosh OS X version of

the monitor mixer control panel

Currently, no OS X version of the monitor mixer control

panel is available.

19.

SPECIFICATIONS

LINE OUTPUTS

Full-scale output

8.2dBu, 2 Vrms

Frequency response

± 0.2 dB, 20 Hz-20 kHz

THD+N @ 0dBFS (1kHz sine wave)

-85dB, < 0.005, 20 Hz-20 kHz

THD+N @ -6dBFS

< -82dB, < 0.008, 20 Hz-20 kHz

SNR

> 100dB, < 0.001%, 20 Hz-20 kHz

Crosstalk

< -95 dB, 20 Hz- 20 kHz

HEADPHONES

Full-scale output

8.2dBu, 2 Vrms

OUTPUT

Frequency response

± 0.2 dB, 20 Hz-20 kHz

THD+N @ 0dBFS (1kHz sine wave)

-80dB, < 0.005% Vrms, 20 Hz-20 kHz

SNR

> 90 dB, 20 Hz-20 kHz

STEREO LINE

Full-scale input

Unbalanced, +8.6dBu, 2 Vrms

INPUT

Frequency response

± 0.2 dB, 20 Hz-20 kHz

THD+N @ -1dBFS

-73dB, < 0.022% Vrms, 20 Hz-20 kHz

SNR

>95dB, A-weighted

20.

LEGAL DISCLAIMER

Technical specifications and appearance are subject to change without notice and accuracy

is not guaranteed. Cymatic Audio accepts no liability for any loss which may be suffered by

any person who relies either wholly or in part upon any description, photograph or statement

contained herein. Colors and specifications may vary from the actual product.
Cymatic Audio products are sold through resellers only. Fulfillers and resellers are not agents of

Cymatic Audio and have absolutely no authority to bind Cymatic Audio by any express or implied

undertaking or representation.
Apple Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries. Windows

is a registered trademark of Microsoft Corporation in the United States and other countries. ASIO

is a registered trademark of Steinberg Media Technologies GmbH.
All other trademarks, product names, and company names mentioned in this document are the

property of their respective owners.

Advertising