CDA SV500 - Manual (Page 8)

7
General Settings and Use
To programme the oven
Turn the function control knob to the required programme.
The display will flash the temperature preset for the programme (as detailed on page 8) and start cooking immediately.
To change the temperature, turn the temperature control knob until the required temperature shows on display. The
temperature will flash on the display whilst the oven heats up. Once the oven has reached the required temperature, the
oven will beep three times and the temperature display will stop flashing.
To set the cooking time (the cooking starts immediately, and finishes at a programmed time to a maximum of 9 hours
59 minutes), touch once so the cooking time indicator flashes and the display shows 0:00. Then touch or until
the required cooking time (in minutes) shows on the display and after eight seconds delay the oven will confirm the
programme. The cooking time indicator will stay lit and the cooking time will show on the display.
To set a delayed programme (the cooking starts and finishes at a programmed time up to 23 hours 59 minutes), first set
the cooking time as above, then immediately touch so the end time indicator flashes and the display flashes the time
the programme is due to end (current time + cooking time). Then touch or until the required end time shows on the
display, and after eight seconds delay the oven will confirm the programme. The cooking and end time indicators will stay
lit, the current time will show on the display and the oven light will switch off. When the programme starts cooking, the
end time indicator will switch off, the cooking time will show on the display and the oven light will switch back on.
To cancel a programme, touch once so the cooking time indicator flashes, then touch until the display shows 0:00.
At the end of the programme, the oven will beep intermittently for approximately two minutes, and the cooking time
indicator will flash. To stop the beep, touch any of the keys.
Please note: The function control knob must be turned to 0 to switch off the oven completely after a
programme is finished, and before any new cooking can start.
If the oven must be preheated, switch on the oven as above. Once the preheat is complete, the upper bars on the
temperature indicator on the display will stay lit and the oven will beep three times, pause, and beep three times again.