ebm-papst ECI-63.XX-K4 - Manual (Page 92)

92
9 RS485 Communication
9.17.2 Answer
RS485 Char Use Value / Comment
1 Start byte COM_CTX_BACK_TO_BOLO
2 Address byte Bus address
3 Status byte
4 Checksum
9.17.3 Error flags
Bit Meaning
7
6
5 Motor is not in free-wheeling, jump back into the bootloader does not take place
4 Incorrect access key, jump back into the bootloader does not take place
9.18 Reset customer password
9.18.1 Request
RS485 Char Use Value / Comment
1 Start byte COM_CRX_CUSTOMER PASS SET
2 Address byte Bus address
3 Customer password until now HiHi
4 Customer password until now HiLo
5 Customer password until now LoHi
6 Customer password until now LoLo
7 New customer password HiHi
8 New customer password HiLo
9 New customer password LoHi
10 New customer password LoLo
11 Checksum
9.18.2 Answer
RS485 Char Use Value / Comment
1 Start byte COM_CTX_CUST_PASS_SET
2 Address byte Bus address
3 Status byte
4 Checksum