Castelle Office Direct OfficeDirect Storage Server - Manual (Page 32)

U SING THE S TORAGE S ERVER ' S S TORAGE
W INDOWS C LIENT S ETUP 29
U
SING THE
S
TORAGE
S
ERVER
'
S
S
TORAGE
To use the Storage Server's storage, you must "Map" a drive letter
to each folder on the Storage Server folder which you wish to
access. The "Drive" will then be available to all Windows
programs. To enable the Storage Server’s storage:
1. Double-click the Network Neighborhood icon on the desktop.
2. Locate the Storage Server, as shown below. If it is not listed,
double-click Entire Network. Then, double-click the
Workgroup that the Storage Server is in. (By default, the
Storage Server is in Workgroup.)
3. Double-click the Storage Server icon
4. Right-click a folder (directory) to which you have access, and
select Map Network Drive, as shown below
.
5. Select a drive letter for this folder, and check the Reconnect at
Logon checkbox. (If this is not done, the mapping will be lost
when you shut down your PC.) Click OK.