Ecler DAM514 - Manual (Page 15)

15
To rename the preset:
 Press the right PARAM key to select the first character to edit
 Edit the new character with the rotary control
 Press the left or right PARAM key to select another character to edit
 Edit the new character with the rotary control
 Etc…
 Pressing SHIFT + CANCEL cancels all previous changes, displays the original name and
maintains the edit mode in order to be able to rename the preset again
 Once all the desired characters are edited, confirm the changes by pressing SHIFT +
SAVE, displaying the PRESET SAVED message for a few seconds. The preset is stored
in memory, but is not selected as active preset by the fact of having been saved
 The main screen returns, showing again the current preset at the time, and it is not
necessarily the newly saved preset
Pressing SHIFT + EXIT at any point during the above process cancels the selection and returns
the main screen.
The parameters stored in a preset are:
 All the input and output settings, including their names (labels)
 The setup for REMOTE ports 1, 2, 3 and 4