E-MU SHORTBoard 49 User Manual
Page 22
20
LONGboard
61
SHORTboard
49
Saving Your Control Settings
The settings of the six control knobs can be saved with the program allowing
you to customize the sound set. Note: Only programs in the KEYS bank
can be saved with modifications. General MIDI programs cannot be saved.
Set the controls the way you want them.
1.
Press and hold the Select button, then press the Column button
2.
of
the current program.
Sto
appears in the display indicating that your
custom settings have been stored with the program.
To Restore the Factory Knob Settings:
►
To restore all factory defaults, hold the select button and power on.
1.
Select Button
Press this button to cycle through
the editing options, then adjust
the value using the data slider.
These settings affect all programs
and are automatically stored.
While in edit mode (any of the Select LEDs on), programs cannot be selected.
Program
This option allows you to access all 128 program change commands on the
internal synthesizer or an external MIDI synthesizer.
To Select a Program using the Data Slider:
►
Press the
1.
Select button repeatedly until the Program LED is lit.
Select the desired program number
2.
using the data slider.
The program change command is transmitted a second after you stop
3.
moving the data slider.
Select
Program
Change
MIDI
Channel
Velocity
Curve
System