E-MU SHORTBoard 49 - Manual (Page 27)

User’s Guide 25
Digital Connections
CONNECT
CHANNEL
SELECT
OFF
CH1 CH2
CH3
USB
MIDI OUT MIDI IN
PIPEline Link Button & Channel Selector
These controls are used with the PIPEline wireless transceiver system. The
keyboard functions a transmitter only.
Setup: Set the channel number to match the channel set on the PIPEline
receiver, then press the Link button. The Link button will flash until the two
units are “paired.” The LED will now remain lit.
See the Wireless Audio Connection instructions.
USB Port
The USB Port is used to transmit MIDI data back and forth between the
keyboard and your computer. The USB cable also supplies power to the unit.
Therefore, the external power supply is not needed when a computer is
connected via USB.
MIDI Connections
These connections provide a way to connect to other MIDI equipment to
your system. MIDI Out can be used to transmit your keyboard performance
to another MIDI instrument.
The keyboard can also be used as a MIDI interface for other MIDI gear
when connected to your computer via USB.