E-MU SHORTBoard 49 - Manual (Page 26)

24 LONGboard
61
SHORTboard
49
Sustain Footswitch
This jack accepts an on/off type footswitch to sustain held keys.
Either a normally-open or normally-closed momentary footswitch can be
used, as the polarity is automatically sensed on power-up.
Control Footpedal
This jack accepts a continuously variable footpedal to control the output
volume. Most types of variable footpedals with a stereo plug can be used.
(Please refer to the wiring diagram shown below.) You can also use a variable pedal
that outputs 0-5 Volts DC at the tip of a mono phone plug.
Pedal Wiring Diagram
Sleeve
Tip
Ring
Sleeve
Tip
Ring
10K - 250K
Sleeve
Tip
Sleeve
Tip
10K - 250K
5V
or
Kensington ® Security Slot
You can secure your keyboard with a Kensington security cable to prevent it
from being stolen.