Canon BJC-80 - Manual (Page 20)

Using the Setup Analyzer
The Setup Analyzer allows the printer driver to evaluate your choice of printing
settings. On the Setting tab, click on the green Check to enable the Setup
Analyzer. Click on the red Circle symbol to disable it.
When you exit the printer driver and accept your printing settings by clicking the
OK button, the Setup Analyzer (if enabled) checks to see if any of your settings
are contrary to the recommended settings. If there are inconsistencies, a dialog
box similar to this appears:
The inconsistencies appear with check boxes. You can use the dialog box
buttons to select or deselect the inconsistencies, and/or fix or ignore the
inconsistencies.
1 of 1 4/24/98 3:01 PM