Futaba 3PL 2.4GHz FHSS - Manual (Page 19)

19 3PL-2.4G Functions
Channel-4 End Point Adjustment (EPA-CH4)
Channel-4 EPA
(4WS function)
Adjust the travel of the servo
while operating the steering
wheel each way.
(BRK function)
Adjust the travel of the servo
while operating the trigger
to the brake side.
Range: 0 - 120%
(Left side) (Right side)
(Brake side)
Use this function to limit the servo
movement to the left or right. The
servo travel to each side can be
independently adjusted.
ｎWARNING
ｊ B e s u r e t h a t t h e l i n k a g e
does not bind or come in
contact with any par ts or
arms. If unreasonable force
is applied to the servo, the
servo may be damaged and
result in loss of control.
ABS function (ABS-CH2)
ABS Cycle Speed
OFF: Inhibited
FST: Active (fast)
MID: Active (middle)
SLW: Active (slow)
ABS function
(Selection key)
This function simulates a full size
car's antilock braking by pulsing
the brake on and off rapidly.
Model stops as rapidly as possible
without skidding.
• The cycle speed can be selected from FST/MID/SLW.
Model Name (NAME)
Model Name
(Selection key)
(Selection key)
Model number
1 - 0
Model name
T h i s f u n c t i o n p r o v i d e s a
3-character name for each of the
model memories in the transmitter
to easily select the correct setup
for the model currently in use.
• Clearly label each model for easy selection.
(This setting screen is displayed when 4WS mixing or Brake mixing is activated.)
4WS/BRK Mixing Selection (SMX)
INH: Inhibited
4WS: 4WS mixing
BRK: Brake mixing for second brake (2 seconds)
Special Mixing Selection
(Selection key)
Either 4WS mixing function or
Brake mixing function can be
selected on this screen.