Reference, 24 reference, Ratings – Futaba 3PL 2.4GHz FHSS User Manual

Page 24

Advertising
background image

24

Reference

Reference

Ratings

Communication method:

One-way operation system

Maximum operating range:

80m (Optimum condition)

For safety:

F/S (Throttle), ID (About 4 billion ways of pair
identifications)

Transmitter T3PL-2.4G

(FHSS system, wheel type, 3+1 channels)
*The 4th channel is used for mixing functions only.
Transmitting frequency:

2.4GHz band

Power requirement:

(Dry cell battery) Penlight x 4(6V)

Current drain:

100mA or less

Transmission antenna:

1/2λ di-pole (Built-in)

Receiver R2004GF:

(FHSS system, 4 channels)
Power requirement:

4.8V or 6V NiCd battery

Size:

26x39x10mm (excluding a projection part)

Weight:

14g

Servo S3003

(Standard servo)
Power requirement:

6V (common with receiver)

Current drain:

8mA (at 6V / Idle)

Output torque:

4.1kg-cm (57in.-oz.) at 6V

Operating speed:

0.19sec/60 degree at 6V

Size:

40.4x19.8x36mm (1.59x0.78x1.42in.)

Weight:

37.2g (1.31oz.)

Servo S3050

(Standard digital servo)
Power requirement:

6V (common with receiver)

Current drain:

8mA (at 6V / Idle)

Output torque:

6.5kg-cm (90.3oz.-in.) at 6V

Operating speed:

0.16sec/60 degree at 6V

Size:

40.0x20.0x38.1mm (1.57x0.79x1.50in.)

Weight:

49g (1.72oz.)

E.S.C. MC230CR / MC330CR

(Electronic speed control)
Operating system:

Forward, reverse, and brake operations are all
linear.

Power requirement:

Nicd battery 6-7 cells (7.2 to 8.4V)

PWM frequency:

1.5kHz (fixed)

Setting:

One-touch input by pushbutton switch. Set data is
saved to built-in EEPROM.

Current capacity (FET rating):

Forward=90A/200A, reverse=45A/100A

Size:

27.1x33.3x12.8mm (1.07x1.31x0.50in.)
(excluding protruding parts)

Silicon cord gauge size:

AWG16/AWG14 equivalent

Weight:

44/45g (1.55/1.59oz.)
(including connectors and switches)

BEC voltage:

6.0V

*Specifications and ratings are subject to change without prior notice.

NOTE: This Futaba FHSS system, including the T3PL-
2.4G transmitter and R2004GF receiver, does not work
with current Futaba FASST™ systems. Please use the
T3PL-2.4G and R2004GF in pairs. Futaba FASST sys-
tems and FHSS systems are not compatible.

Advertising