Futaba 3PM 2.4GHz - Manual (Page 19)

20
Before Using
Always use the special charger or a quick charger for digital pro-
portional R/C sets to charge a digital proportional R/C set NiCd
battery.
Overcharging a NiCd battery can result in burns, fire, injuries, or loss of sight due to
overheating, breakage, or electrolyte leakage.
Never try to recharge a dry cell bat-
tery.
The transmitter may be damaged or the battery
electrolyte may leak or the battery may break.
When the charger is not in use, dis-
connect it from the AC outlet.
Do this to prevent accidents and to avoid overheat-
ing.
Caution
Never plug it into an outlet of other
than indicated voltage.
Plugging the charger into the wrong outlet may re-
sult in an explosion, sparking, or fire.
Do not insert and remove the
charger when your hands are wet.
It may cause an electric shock.
Warning
Use the
special
charger.
Set data backup
The set data of each function of the T3PM-2.4G transmitter is stored in a memory
element that does not require a backup battery. Therefore, the transmitter can be used
without paying attention to the backup battery life.