Futaba 3PM 2.4GHz - Manual (Page 53)

54
Functions
SW1
SW2
Function Select Switch / FNC-SW
This function allows selection of the function to be performed by the switches
(SW1/SW2).
Settable functions (SW1)
OF: (function off)
3C: Channel 3
MX: Programmable mixing
TM: Timer switch
Settable functions (SW2)
OF: (function off)
3C: Channel 3
MX: Programmable mixing
Function select switch setup
1 (Setup item selection)
Use the (CH) button to select the item to be set.
2 (When changing the function)
Use the (+) or (-) button to select the function.
3 When ending adjustment, turn off the power switch before use.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key. 2. Next, use "SEL" key to select
the desired function screen.
Press "CH" key to select the next set-
up screen.