Futaba 3PM 2.4GHz - Manual (Page 39)

40
Functions
Brake mixing adjustment
(Preparation)
- Select setup item "BMXMD" and make the following adjustments.
1
(Function ON/OFF)
Set the function to the "ON" state by pressing the (+) or (-) button.
OFF: Function OFF
ON: Function ON
2
(Mixing amount adjustment)
Select setup item "BMX-RT" and use the (+) and (-) buttons to adjust the
mixing amount.
- Mixing amount can be adjusted within the 0~120% range.
3
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.
Mixing rate
0 ~ 100 ~ 120
Initial value: 100
Brake Mixing / BMX
Use this mixing when the front and rear brakes must be adjusted independently, such
as in 1/5GP cars, etc. This mixing uses the 2nd channel to control the rear brakes and
the 3rd channel to control the front brakes.
Operation
- When braking, mixing is applied to 2nd channel and to 3rd channel.
- Mixing rate setting are possible.
- The set value of A.B.S. functions is reflected.
(Initial screen)
Press "SEL" key to select the
desired function screen.
Calling the setup screen
(Setup screen)
Press "CH" key to select the next set-
up screen.
Setup items
BMX-RT: Mixing rate
BMX-MD: Function ON/OFF