Futaba 6D, 6DN - Manual (Page 11)

3. When installing the Servo, the use of
the Servo tray is very convenient. This
is done according to the diagram.
Please make sure each connector is
plugged in completely.
Always re-check the installation of the
Servo Horns and Rods to make sure
that their motion matches the move-
ment of the Transmitter control stick.
Use the reversible Servo (FP-S5L) for
Throttle control on shoulder wing
models or for actuating the rudder
and nose gear, however this Servo
can not be used for Aileron.
10