Futaba 6D, 6DN - Manual (Page 4)

TRANSMITTER OPERATION
With the FP-4DN, a two-stick control will
operate:
1. Throttle
2. Aileron
3. Elevator
4. Rudder
With the FP-5DN, in addition to the above
mentioned operations, a snap-switch is
provided for the landing gear or other
suitable operations.
With the FP-6DN, aside from the 5 move-
ments above, an additional control (vol-
ume type control) is added on the front
panel for the 6th control (variable move-
ment).
Operating procedures for the FP-4DN, FP-
5DN, FP-6DN are the same as they are
designed and Manufactured to the same
specifications.
A s an additional feature, all Futaba Propo.
Models are provided with two (2) sets of
knobs (long and short), to suit your re-
quirements. To change knobs, pull firmly
off the Black Plastic Knobs from the con-
trol sticks and replace with the spare plas-
tic knobs provided in the Kit.
A neck strap too is provided for your con-
venience.
3