Flow chart acro mode functions – Futaba 6EX 2.4GHz User Manual
Page 31
Advertising
31
MODE key
MODE key
SELECT key
DATA INPUT
lever
[CH 2-5]
[CH 2-5]
[CH 2-3]
[Model 2-5]
(press MODE and SELECT keys for one second)
*1. Press the DATA INPUT lever
for 0.5 seconds
*1
*1
*1
*1
*1
*1
*1
Stick Mode
FLOW CHART ACRO MODE FUNCTIONS
(Screen at Startup)
To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
To change the Stick Mode, turn
on the transmitter and hold the
MODE and SELECT keys down
simultaneously.
Use the DATA INPUT lever to display
the desired stick mode.
Simultaneously press the “MODE” and “SELECT” keys and hold them down for one second to enter the programming
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
Advertising