Futaba 7UAF, 7UAP - Manual (Page 13)

• FUNCTION AND DATA SETTING
Press the [MODE SELECT] To normal display mode
Mixing activate/inhibit mode setting
Set the mode with the
keys.
+ : Activate
—: Inhibit
Master channel selection
PMX1
PROGRAMMABLE MIXING 1
This mixing is useful in correcting
bad tendencies of the aircraft and
in making operation more pleasant.
• Mixing of any two channels is
possible.
• The left and right (up and down)
mixing rate can be set independ-
ently.
• Setting range: 0 — 100% (mixing
maximum)
(INH: Inhibit state)
Activate state
ON:
OFF:
ON
OFF
Set the flashing display to the
mark with the
keys.
Select the channel to be set with
the
keys.
Slave channel selection
Set the flashing display to the
mark with the
keys.
Select the channel to be set with
the
keys.
Mixing servo direction of operation setting
Set the flashing display to "+"
(or "—") with the
keys.
Held as long as the master chan-
nel stick (VR or switch) is in the
R/U or L/D direction.
Set the direction of operation
with the keys.
+ : Normal direction
— : Reverse direction
Set another direction by repeat-
ing steps
and
R/U: Right or up
L/D: Left or down
Mixing rate setting
Set the flashing display to "%"
with
keys.
Set the same as
Set the mixing rate with the
keys.
(When the + and — keys are
pressed simultaneously, 50% is
set.)
Set the same as
To PMX2
— 11 —